Chair Management
Chair Materials Science and Engineering, Ruhr University Bochum

Particles in Shape Memory Alloys: Effects on Functional and Structural Properties

Shape memory components exploit the thermal (one way effect, 1WE) and mechanical memory (pseudoelastictiy, PE) of shape memory alloys, which rely on the martensitic forward and reverse transformation in shape memory alloys (SMAs). When making shape memory alloy (SMA) components, one cannot avoid the formation of small particles in the microstructure. These can form as metastable precipitates like Ni₄Ti₃ in Ni-rich near equiatomic NiTi alloys.

More about

Postdoctoral Researcher
Institute of Microstructure Technology, Karlsruhe Institute of Technology (KIT)

Modeling Woven Porous Regenerators for Elastocaloric Cooling

Heating and cooling systems in Europe use about 40% of the continent’s energy, mostly relying on refriger-ants that harm the environment. Elastocaloric cooling offers a greener solution by using shape-memory alloys that heat up or cool down when subjected to compression/tension, eliminating harmful refrigerants. Regenerative elastocaloric systems, employing oscillating fluid flows and active elastocaloric regenerators (AERs), enhance temperature spans 2-4 times beyond material adiabatic limits by recycling heat and improving heat exchange efficiency.

More about

Head of Research Team “Ferroic materials, films and devices”
Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf

Increasing Efficiency and Cycle Frequency of Thermoelastic Harvesting for low-grade Waste Heat with Shape Memory Wires

The conversion of low-grade waste heat (<100 °C) from industrial processes can contribute significantly to the achievement of the ambitious climate goals, yet the construction of efficient, powerful and inexpensive systems remains a challenge. Especially martensitic materials are experiencing a renaissance as active materials for harvesting of waste heat, due to their high actuation energy and high conversion efficiency. 

More about

Academic Senior Council, Leader Research Group Materials Processing
Chair Materials Science and Engineering, Ruhr University Bochum

On the importance of alloy composition and microstructure optimization in shape memory technology

In this study, we present examples which demonstrate how the functional properties and performance of NiTi-based shape memory alloys (SMAs) depend on the composition and microstructure. There are cases where small or large concentration changes are required to achieve changes in transformation behavior.

More about

Group Leader
Institute of Microstructure Technology, Karlsruhe Institute of Technology (KIT)

Elastocaloric cooling from miniature scale to macro scale

Elastocaloric cooling is an emerging solid-state cooling technology that promises environmentally friendly and energy-efficient alternatives to traditional vapor-compression systems. This talk presents recent advancements in elastocaloric cooling devices at Karlsruhe Institute of Technology, spanning from miniature to macro-scale implementations.
At the miniature scale, we utilize superelastic SMA films, which combine a high elastocaloric effect with efficient heat transfer due to their large surface-to-volume ratios.

More about

Research Assistant
Laser Powder Bed Fusion, Fraunhofer Institute for Machine Tools and Forming Technology IWU

Additive manufacturing and post processing of NiTi for intracranial stents providing complex geometries

Nickel-Titanium is a commonly used alloy in medical technology for the manufacture of stents because of its pseudoelasticity. Typical manufacturing processes for NiTiNOL (NiTi) stents are laser cutting from a tube or plate or braiding by weaving thin wires together to form a mesh-like structure. The production of complex stent geometries is costly and time-consuming, often restricted to tubular outer geometries due to manufacturing constrains.

More about

Professor
Dept. of Physics, University of the Balearic Islands

High Temperature Shape Memory Alloys Based on Ni-rich Ni-Ti-Hf and Ni-Ti-Zr

There is an increasing interest from automotive, aerospace, manufacturing and energy exploration industries in shape memory alloys capable to be used as high-temperature actuators, working at temperatures well above 100 °C. In this way, intense research has been done on ternary additions to binary Ni-Ti SMAs to raise the transformation temperatures and preserve at least part of their exceptional functional properties.

More about

Research Assistant
Chair of Production Systems, Ruhr University Bochum

Long-Term Behavior of Electrically Driven SMA Wires Deflected by a Pulley

To enhance the commercial viability and cost-efficiency of shape memory alloy (SMA)-driven actuators, it is essential to optimise their fatigue life. Typically, actuator systems are developed first, with durability investigations conducted afterwards. This sequence is primarily due to the absence of standardised handling guidelines for SMA wires — guide-lines that would enable the identification of factors limiting fatigue life prior to full-scale development.

More about

CEO
MetShape GmbH

Opportunities and Potentials of Lithography-based Metal Manufacturing (LMM) for the Production of Miniaturized and Complex Metal Components

Lithography-based Metal Manufacturing (LMM) is a promising additive manufacturing (AM) technology designed for the production of complex, miniaturised metal parts with high precision and surface quality. The presentation will provide an introduction to the fundamental principles of the LMM process and explain the process chain. This process chain commences with the formulation of the feedstock and continues through photopolymer-based printing, debinding and sintering.

More about

Research Associate, Professorship of Applied Thermodynamics
University of Technology Chemnitz

Infrared Thermography for Precise Microscale Temperature Measurements on NiTi-Based Shape Memory Alloy Wires

The shape memory effect and superelasticity of nickel-titanium alloys (NiTi) make them highly attractive for actuators and elastocaloric cooling technologies, enabled by a reversible phase transformation between martensite and austenite triggered by temperature or stress. Thin NiTi wires are often used due to their favorable surface-to-volume ratio and manufacturability [1]. However, accurate temperature measurement in these wires is challenging, as conventional contact thermometry may interfere with phase transformation behavior.

More about

Researcher, Institute of Structures and Design
DLR (German Aerospace Center)

SMA in Jet Engines and Turbomachinery: Explorative Investigation of Monolithic NiTiX Blades

As of today, SMA have not yet enabled widespread breakthroughs in aircraft propulsion, stationary energy production, or turbomachinery in general. Reasons for this are manifold and involve factors of technology, certification, and economy. From the multitude of technical obstacles, the occurring temperatures are especially significant and quickly rule out any SMA composites involving polymers.

More about

Research Assistant
Chair Materials Science and Engineering, Ruhr University Bochum

Towards sustainable NiTi metallurgy: Impurities, microstructural evolution and fundamental effects on phase transformation behavior

Research on recycling of important engineering materials has significantly intensified during the last years. To date, sustainability aspects related to nickel and titanium have been overshadowed by aluminum and steel recycling, as these metals dominate global markets.

More about

Scientific Director / CEO
ZeMA – Zentrum für Mechatronik und Automatisierungstechnik gemeinnützige GmbH

Pushing the Boundaries of Shape Memory Alloy Actuators: record-breaking actuation frequencies and AI-based closed-loop control

Shape memory alloys (SMA) are commonly utilized in compact actuators due to their high energy density, meaning possible work output in relation to their weight and volume. Their application area is limited by their poor dynamic behavior, caused by the thermal activation characteristics of SMA materials. Typical actuation frequencies of SMA-based actuators range from 1 Hz to 10 Hz.

More about

Post Doc
Material Science and Engineering, Kiel University

Thin-Film NiTi Intrasaccular Implant with Flaps for Aneurysm Treatments

Cerebral aneurysms are dilations of blood vessels that can rupture with fatal consequences[1]. Commercial implants for aneurysm treatment are often made of nickel-titanium (NiTi) due to its unique shape memory and superelastic properties. Shape memory alloys (SMAs) like NiTi enable devices to self-expand and conform to complex vascular anatomies, making them ideal for minimally invasive interventions[2].

More about

Research Assistant
Chair Materials Science and Engineering, Ruhr University Bochum

Using shape memory alloys for low temperature waste heat conversion – material properties, requirements, and challenges

Close to 60% of the primary energy loss in conversion processes comes from domestic systems, which operate in a temperature range below 100 °C. This waste heat cannot be utilized in technical applications. Recovering it offers a path to reduce energy loss and to improve overall efficiency. While industrial waste heat recovery is well-established for high-temperature processes, there is a major technical gap in the utilization of low-grade (temperature) thermal energy.

More about

Research Assistant
Applied Laser Technologies, Ruhr University Bochum

Dissimilar Laser Welding of NiTi for Actuator Applications

Integration of NiTi shape memory alloys into technical systems requires joining technologies that preserve their unique functional properties while enabling automated processing. Traditional welding methods often compromise the martensitic transformation behavior due to excessive heat input and uncontrolled microstructural changes.

More about

Professor
Materials Science and Engineering, The Ohio State University

Extreme Processing of Binary NiTi Shape Memory Alloys

This work explores processing of binary NiTi shape memory alloys (SMAs) in nonconventional ways and the resulting effects on pseudoelastic response. Among the approaches employed are: (1) augmented laser impact welding of the SMA and brass; (2) Taylor impact studies of SMA cylinders; (3) laser powder bed fusion of oxide dispersion strengthened binary NiTi.

More about

phD Stundent and member of the Research Group Biocoatings
AG Immunology of the Lung, Molecular Immunology, RUB, Bochum
phenox GmbH
Fraunhofer Institute for Machine Tools and Forming Technology IWU, Dresden

Biocompatibility of NiTi stents produced by Laser Powder Bed Fusion

Nickel–Titanium shape memory alloys (NiTi-SMA) are of biomedical interest due to their unusual range of pure elastic deformability. These characteristics enable NiTi stents to be compressed for minimally invasive insertion and subsequently self-expand to their functional diameter upon deployment.

More about

Post Doc
Applied Laser Technologies, Ruhr University Bochum

Ultrashort Pulse Laser Cutting of NiTi in Liquid Environment

Laser treatment of medical stents is often regarded critically due to the introduction of heat into the material. Despite being termed “cold ablation,” ultrashort pulse laser processing still results in a non-negligible heat-affected zone, which demands subsequent processing steps. This is particularly relevant when processing fragile components such as wires or foils, where the heat cannot be dissipated across large volumes.

More about

Geschäftsführer, Ingpuls Dynamics GmbH
Direktor Innovation und Geschäftsentwicklung, Brand KG

Material Science meets Family Business

SMA has been well known in the context of actuator technology for many decades. Nevertheless, this technology tends to lead an outsider existence in practical applications. The main reason for this is that, firstly, it requires in-depth, usually application-specific, material know-how, secondly, potential customers must be convinced of the fundamental suitability of the technology and, thirdly, professional (large-scale) series development and production with all processes and certificates must be available in order to successfully launch a robust actuator system with SMA components on the market. 

More about

Teamleader Shape Memory Materials
Shape Memory Alloys, Fraunhofer Institute for Machine Tools and Forming Technology IWU

Design of an inchworm actuator based on a shape memory alloy wires

The presentation introduces a novel shape memory alloy (SMA)-based inchworm actuator that offers unlimited displacement, in contrast to traditional SMA actuators, which only provide a limited displacement of 1-2% of the length of the shape memory component. The inchworm actuator concept, inspired by the locomotion of an inchworm, facilitates larger displacements through adding up incremental movements. 

More about

Research Associates
Applied Laser Technologies, Ruhr University Bochum

Directed energy deposition for functionalization of steel components with NiTi

Shape memory alloys (SMAs) such as Nickel-Titanium (NiTi) offer promising functional properties for a wide range of industrial applications. In this study, a cost-effective approach is presented for functionalizing low-cost steel components with NiTi, using laser-based Directed Energy Deposition (DED) with coaxial wire feeding. This research project implements NiTi to compensate for load cycles.

More about

Managing Director
BioActiveMetals S.r.l.

Ni-Ti-Hf-Nb SMAs for High-Temperature Actuation

Ni-Ti-Hf-Nb SMAs for High-TemperIn the field of high-temperature shape memory alloys (HTSMA) for actuators operating above 100 °C, alloy development has not yet fully met industrial requirements. The most promising and extensively studied system is Ni-Ti-Hf. This system has been widely investigated to achieve higher transformation temperatures compared to standard binary NiTi; however, its development remains far from widespread commercialization, primarily due to the limited processability of these alloys.

More about

Full Professor
Deparment of Civil and Environmental Engineering, Politecnico di Milano

Predictive Approaches to Enhance the Fatigue Assessment of Ni-Ti Biomedical Devices

Nickel-Titanium (Ni-Ti) shape memory alloys are the top choice for designing self-expanding cardiovascular devices for minimally invasive surgeries, thanks to their superelastic behavior related to stress-induced phase transformation. The long-term reliability of these devices remains a critical issue, especially for peripheral stents and heart valves subjected to millions of load cycles due to body movements.

More about

PhD Candidate
Department of Civil Engineering, York University

Enhancing Seismic Resilience: From BRBs to Superelastic SMAs

With the enactment of modern seismic provisions, there is an increasing need to retrofit existing structures. Past earthquakes have revealed the life-threatening consequences and economic losses resulting from inadequately designed buildings. Seismic retrofitting, therefore, is an essential strategy to enhance structural resilience.

More about

PhD Candidate
Department of Civil Engineering, York University

Implementation of Superelastic Nitinol in New Reinforced Concrete Construction – Experimental Research

The occurrence of earthquake events can be detrimental to the infrastructure of the affected areas in addition to the immediate risk to human life. Even if structures in these areas are built to modern seismic design codes, and successfully avoid collapse ensuring life safety, it is still common to find many buildings deemed unsafe for occupation due to significant residual displacements.

More about

Professor
Department of Civil Engineering & Deputy Provost, Markham Campus, York University

Superelastic Nitinol for Improved Structural Resilience of Reinforced Concrete Structures

Over the past two decades, research has intensified on retrofit methodologies and new construction that incorporate Superelastic Nitinol (SE-SMAs) as the main reinforcing material. This is in direct response to several major earthquakes, which highlighted that while structures may not collapse and satisfy the life-safety performance criteria, the damage is often to the extent that demolition is the only alternative.

More about

Assistant Prof.
Engineering, University of Galway

Computational modelling of the mechanical performance of Nitinol guidewires

Guidewires are long, slender, flexible wires with a metal core for navigating through complex networks of blood vessels to guide the placement of larger medical devices. In some instances, Nitinol guidewires can exhibit undesirable phenomena such as “lag” and “whip”, where the movement input by the surgeon proximally is not transferred to the distal end of the device during a procedure.

More about

Senior Engineering Manager
Nitinol NPD, Fort Wayne Metals

Bridging Innovation and Adoption: Navigating Industry-Specific Hurdles in New Alloy Introductionoy wires

In the world of New Product Development, customer-driven innovation often reveals opportunities to enhance the performance of established materials like Nitinol. While Nitinol is well-known in the medical field, expanding its use into industries such as automotive, energy, aerospace, and electronics requires more than just technical adaptation—it often demands the creation of entirely new alloys.

More about

Head of Group
Electron Microscopy and Microstructural Analysis Group, Chemnitz University of Technology

Effect of thermomechanical pre-treatment on Ni release from electropolished NiTi wires

Assessment of NiTi devices for medical applications requires careful consideration of Ni ion release. For addressing specific release behavior of NiTi alloys, the standard ISO 10993-15 was updated, extending the immersion time from one week to twelve weeks. This revision points out that NiTi exhibits a rather complex Ni release behavior with fundamental aspects requiring further investigation. 

More about

Co-Founder
R&D Department, StraightUp

StraightUp – Shape Memory Alloys against back pain 

Poor posture and back pain are among the most common health problems of our time – often caused by sedentary activities and a lack of exercise. Our young start-up is developing an intelligent posture coach in the form of a smart wearable that combines modern sensor technology with a design suitable for everyday use.

More about

Managing Director
Ingpuls GmbH

Where do we stand today – Status quo on the progress of non-medical application fields of NiTi based shape memory alloys. Driving forces and obstacles in the framework of the implementation of SMA actuators for different industries

In retrospect, it is clear that there has always been great interest in advanced SMA-based actuators in recent decades. However, for a long time it was not possible to get beyond the status of simple functional demonstrators. In some cases, the materials with their functional and structural properties were not yet good enough, but in some cases, it was also the framework conditions of the interested fields of application. 

Managing Director
Ingpuls GmbH

tba 

tba 

Managing Director
Ingpuls GmbH

tba 

tba 

Mehr dazu

President, Research and Development
Blaze BioTech

About the history of Nitinol Orthopedic Devices

Nitinol, a nickel-titanium alloy, is becoming more widely used in orthopedic applications due to its unique properties of shape memory and superelasticity. These properties allow for minimally invasive procedures, faster healing times, and more natural load distribution in bone and joints. Common applications include bone staples, intramedullary nails, and fracture fixation devices.

More about

President, Research and Development
Blaze BioTech

About the history of Nitinol Orthopedic Devices

Nitinol, a nickel-titanium alloy, is becoming more widely used in orthopedic applications due to its unique properties of shape memory and superelasticity. These properties allow for minimally invasive procedures, faster healing times, and more natural load distribution in bone and joints. Common applications include bone staples, intramedullary nails, and fracture fixation devices.

More about